纳米压入测试仪 (NHT)

纳米压入测试仪纳米压入测试仪

纳米压入测试仪主要适用于测量纳米尺度的硬度与弹性模量，测量结果通过载荷及压入深度曲线计算得出，无需应用显微镜观测压痕面积。纳米压入测试仪可被用于有机或无机、软质或硬质材料的检测分析，包括PVD、CVD、PECVD薄膜，感光薄膜，彩绘釉漆，光学薄膜，微电子镀膜，保护性薄膜，装饰性薄膜等等。基体可以为软质或硬质材料，包括金属、合金、半导体、玻璃、矿物和有机材料等。

特点

  • 独特的参比环设计-实时消除大部分热漂移
  • 光学显微镜自动控制观测系统
  • 带有反馈系统的载荷加载系统
  • 压入深度的电容性差分测量
  • 计算机软件包，自动进行数据获取、储存、分析等

选件

  • 真空及环境控制
  • 原子力显微镜
  • 高分辨率视频光学显微镜
  • 环境隔离罩
  • 高分辨率X、Y工作台(精确到0.25微米)

csm title 相关链接

csm title Related documents
Products catalogs
Indentation Catalog
Application Bulletin n°36

On the use of nanoindentation for the determination of visco-elastic properties of polymers
Application Bulletin n°35

Nanoindentation approach to mechanical testing of extremely soft materials
Application Bulletin n°32

Characterization of thermal spray coatings by  instrumented indentation and scratch testing Part II:  Indentation of plasma sprayed coatings
Application Bulletin n°30

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Measurement of Acoustic Emission during Microindentation
Application Bulletin n°29

Mechanical Properties of Cementitious Materials
Application Bulletin n°27

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure
Application Bulletin n°24

Intrinsic bone tissue quality is altered in osteoporosis and selectively influenced by its treatments (NHT)
Application Bulletin n°23

The Influence of Surface Roughness on Instrumented Indentation Testing (IIT) (NHT/MHT)
Application Bulletin n°22

Investigation of creep behaviour using Micro or Nano Indentation Tester (MHT/NHT)

Application Bulletin n°21

Investigation of the surface fracture resistance of a SiN coating by Impact testing (NTR)
Application Bulletin n°12

- Micro-Electronic Applications
- Nano-Scratch Tester (NST) for characterizing anti-stiction coatings for Microsystems
- In-situ Integrated Circuit (IC) characterization with the Nano Hardness Tester (NHT)
- Quality control of Micro-Slit reflective coating with the Nano-Scratch Tester (NST)
Application Bulletin n°11

- Nanoindentation with spherical indenters for characterization of stress-strain properties
- Characterization of IC bonded gold wires with the Nano Hardness Tester (NHT)
- New Nano-Scratch Tester (NST) allows better magnetic hard disk characterization
Application Bulletin n°10

- New LOC module for the SFM provides high resolution frictional contrast
- Characterization of Tribological transfer films using combined NHT/SFM
Application Bulletin n°09

- MST Swinging Module for variable frequency scratch testing
- Combined NHT/SFM for investigation the mechanical properties of Cr2O3 thin films
- New Industrial Calotest allows greater fl exibility for measuring over/undersized samples
Application Bulletin n°07

- Forthcoming Nano Scratch Tester (NST) for characterization of ultra-thin films
- Micro structured silicon wafers compared with the CSM Tribometer
- Combined NHT/SFM for investigating the tip defect of common indenters
Application Bulletin n°06

- Micro Scratch Tester (MST) for assessing the scratch resistance of SiO2 passivation layers
- High-Vacuum Tribometer for MoS2 alloy characterization
- Combined NHT/SFM for characterization of Silicon materials
Application Bulletin n°05

- Finer particle size allows better coating characterization with the Calotest
- Combined NHT/SFM for characterization of coated systems
Application Bulletin n°03

- New integrated SFM objective for better characterization of NHT indentations
- Modified Micro Scratch Tester (MST) for im­proved force resolution at low loads
- Hard coating characterisation with the CSM Tribometer
Application Bulletin n°01

- New Nano-Hardness Tester (NHT) for characterization of MoS2 thin films
- Automobile bumper paint adhesion analyzed using Micro Scratch Tester (MST)
- Using CSM's Revetest (RVT) scratch-tester for Rockwell indentation
- Hard coating characterization with the Revetest (RVT) scratch tester