划痕测试的典型应用案例

Applications of the ConScan Surface Profilometer

Characterization of thermal spray coatings by  instrumented indentation and scratch testing Part II:  Indentation of plasma sprayed coatings

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Measurement of Acoustic Emission during Microindentation

Characterization of thermal spray coatings by instrumented indentation and scratch testing: Part l

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure

The Influence of the Rockwell Indenter Tip Geometry on the Progressive Load Scratch Test

Influence of indenter tip radius on the scratch resistance of an automotive clearcoat

Indentation, Tribology and Scratch Test Standards

- Automotive Applications
- Tribometer Lifetime Study of Wheel Bearings
- Elasto-plastic properties of polymeric varnishes
- Wear properties of rubber seals
- Friction and wear on Brake Pads
- Hardness of DLC-coated tappets
- Controlled lubricant studies
- Scratch resistance of chrome-plated trim
- Adhesion of polymeric bumper paint
- Mechanical properties of automotive tyre

- Characterization of Polymers
- Quality Control of Minidisk polymer topcoat with Nano Scratch Tester and Tribometer
- Nano Scratch method developed as reference test for polymeric automobile topcoats
- Failure properties of nail varnish investigated with the Micro Scratch Teste

- Measurement of hardness as a function of depth in nitrided 316L stainless steel
- Scratch Test Atlas of typical failure modes obtained in scratch testing with the Revetest instrument
- High-Temp. Tribometer for friction comparison of automobile brake pad materials

- Influence of tip size on the critical load during scratch testing with the Micro Scratch Tester
- Failure of TiN-coated polymer measured with the Pin-on-Disk Tribometer
- Nano-Scratch Tester (NST) for measurement of dielectric thin films

- Micro-Electronic Applications
- Nano-Scratch Tester (NST) for characterizing anti-stiction coatings for Microsystems
- In-situ Integrated Circuit (IC) characterization with the Nano Hardness Tester (NHT)
- Quality control of Micro-Slit reflective coating with the Nano-Scratch Tester (NST)

- Nanoindentation with spherical indenters for characterization of stress-strain properties
- Characterization of IC bonded gold wires with the Nano Hardness Tester (NHT)
- New Nano-Scratch Tester (NST) allows better magnetic hard disk characterization

- MST Swinging Module for variable frequency scratch testing
- Combined NHT/SFM for investigation the mechanical properties of Cr2O3 thin films
- New Industrial Calotest allows greater fl exibility for measuring over/undersized samples

- New Industrial Calotest for improved coating thickness determination
- Micro Hardness Tester (MHT) for fracture toughness determination of brittle materials
- New Tribometer option for reciprocating wear testing of plasticised tickets
- Low-load Micro Scratch Tester (MST) for characterization of thin polymer films

- Forthcoming Nano Scratch Tester (NST) for characterization of ultra-thin films
- Micro structured silicon wafers compared with the CSM Tribometer
- Combined NHT/SFM for investigating the tip defect of common indenters

- Micro Scratch Tester (MST) for assessing the scratch resistance of SiO2 passivation layers
- High-Vacuum Tribometer for MoS2 alloy characterization
- Combined NHT/SFM for characterization of Silicon materials

- Modified Pin-on-Disc Tribometer for controlled lubricant studies
- Diamond knife for MST characterization of coated optical fibers
- Controlling magnetic hard disk adhesion to ceramic substrates with the MST
- Scanning force microscopy of low load indentations into aluminum thin films

- New integrated SFM objective for better characterization of NHT indentations
- Modified Micro Scratch Tester (MST) for im­proved force resolution at low loads
- Hard coating characterisation with the CSM Tribometer