- Influence of indenter tip radius on the scratch
resistance of an automotive clearcoat
- Intrinsic bone tissue quality is altered in osteoporosis
and selectively influenced by its treatments (NHT)
- The Influence of Surface Roughness on
Instrumented Indentation Testing (IIT) (NHT/MHT)
- Investigation of creep behaviour using Micro or Nano Indentation Tester (MHT/NHT)
- Investigation of the surface fracture resistance of a SiN coating by Impact testing (NTR)
- Nano Tribometer Applications Investigation of lubrication regimes using ultra low contact pressures
- Adhesion and friction studies of materials for micro electro mechanical systems (MEMS)
- Temperature-Specific Indentation Testing
- Dynamic Indentation Testing
- Indentation Test Standards
- Tribology Test Standards
- Scratch Test Standards
- Biomedical Applications
- Micro-mechanical properties of calcium phosphate coatings for titanium prostheses
- Adhesion of contact lens coatings
- Mechanical properties of teeth materials
- Controlled drug release valves
- Scratch resistance of arterial implants
- TiN coating for hip prostheses
- Hardness of bone tissue
- Characterization of Tin Oxide coatings for biomedical applications
- Automotive Applications
- Tribometer Lifetime Study of Wheel Bearings
- Elasto-plastic properties of polymeric varnishes
- Wear properties of rubber seals
- Friction and wear on Brake Pads
- Hardness of DLC-coated tappets
- Controlled lubricant studies
- Scratch resistance of chrome-plated trim
- Adhesion of polymeric bumper paint
- Mechanical properties of automotive tyre
- Characterization of Polymers
- Quality Control of Minidisk polymer topcoat with Nano Scratch Tester and Tribometer
- Nano Scratch method developed as reference test for polymeric automobile topcoats
- Failure properties of nail varnish investigated with the Micro Scratch Tester
- Measurement of hardness as a function of depth in nitrided 316L stainless steel
- Scratch Test Atlas of typical failure modes obtained in scratch testing with the Revetest instrument
- High-Temp. Tribometer for friction comparison of automobile brake pad materials
- Influence of tip size on the critical load during scratch testing with the Micro Scratch Tester
- Failure of TiN-coated polymer measured with the Pin-on-Disk Tribometer
- Nano-Scratch Tester (NST) for measurement of dielectric thin films
- Micro-Electronic Applications
- Nano-Scratch Tester (NST) for characterizing anti-stiction coatings for Microsystems
- In-situ Integrated Circuit (IC) characterization with the Nano Hardness Tester (NHT)
- Quality control of Micro-Slit reflective coating with the Nano-Scratch Tester (NST)
-
- Nanoindentation with spherical indenters for characterization of stress-strain properties
- Characterization of IC bonded gold wires with the Nano Hardness Tester (NHT)
- New Nano-Scratch Tester (NST) allows better magnetic hard disk characterization
- New LOC module for the SFM provides high resolution frictional contrast
- Characterization of Tribological transfer films using combined NHT/SFM
- MST Swinging Module for variable frequency scratch testing
- Combined NHT/SFM for investigation the mechanical properties of Cr2O3 thin films
- New Industrial Calotest allows greater fl exibility for measuring over/undersized samples
- New Industrial Calotest for improved coating thickness determination
- Micro Hardness Tester (MHT) for fracture toughness determination of brittle materials
- New Tribometer option for reciprocating wear testing of plasticised tickets
- Low-load Micro Scratch Tester (MST) for characterization of thin polymer films
- Forthcoming Nano Scratch Tester (NST) for characterization of ultra-thin films
- Micro structured silicon wafers compared with the CSM Tribometer
- Combined NHT/SFM for investigating the tip defect of common indenters
- Micro Scratch Tester (MST) for assessing the scratch resistance of SiO2 passivation layers
- High-Vacuum Tribometer for MoS2 alloy characterization
- Combined NHT/SFM for characterization of Silicon materials
- Finer particle size allows better coating characterization with the Calotest
- Combined NHT/SFM for characterization of coated systems
- Modified Pin-on-Disc Tribometer for controlled lubricant studies
- Diamond knife for MST characterization of coated optical fibers
- Controlling magnetic hard disk adhesion to ceramic substrates with the MST
- Scanning force microscopy of low load indentations into aluminum thin films
- New integrated SFM objective for better characterization of NHT indentations
- Modified Micro Scratch Tester (MST) for improved force resolution at low loads
- Hard coating characterisation with the CSM Tribometer
- Vickers indentation using CSM's Micro Scratch Tester (MST)
- Abrasion testing of hard coatings with the Calowear Tester
- Quality control of IC bonding pads with the Nano Hardness Tester (NHT)
- Hard coating characterization with the Revetest (RVT) scratch tester
- New Nano-Hardness Tester (NHT) for characterization of MoS2 thin films
- Automobile bumper paint adhesion analyzed using Micro Scratch Tester (MST)
- Using CSM's Revetest (RVT) scratch-tester for Rockwell indentation
- Hard coating characterization with the Revetest (RVT) scratch tester
|
