トライボメータ

Pin-on-Disk tribometer for friction and wear studiesトライボメータは二つの材料表面が互いに擦れ合った際の摩擦・摩耗の振幅を計測します。計測方法としては、平板またはボール状のプローブを試料（図中Sample）の上に置き、あらかじめ設定した荷重（Load）を付加していきます。試料は回転または直線運動してプローブと摩擦します。その結果、プローブと試料との間に働く摩擦力が計測されます。さらに試料、プローブ両方の摩耗量が、摩擦試験中に減った材料の重量から計算されます。

 

このシンプルな手法により、ほぼすべての固体材料の組み合わせで、摩擦・摩耗挙動の計測や研究に供されています。

 

//// 特徴

> High resolution obtained with unique frictional force sensor design
> Easy and automated calibration procedures

 

//// オプション

The Compact Profilometer is a very user-friendly tool, dedicated to fast and easy profile measurements of the sample track section created by the tribological tests.

CSM Instruments のトライボロジー・カタログをご覧ください。

 

 

 

 

 

csm title Related documents
Tribology Catalog
Application Bulletin n°33

Applications of the ConScan Surface Profilometer
Application Bulletin n°20

- Nano Tribometer Applications Investigation of lubrication regimes using ultra low contact pressures
- Adhesion and friction studies of materials for micro electro mechanical systems (MEMS)
Application Bulletin n°18

Indentation, Tribology and Scratch Test Standards
Application Bulletin n°16

- Automotive Applications
- Tribometer Lifetime Study of Wheel Bearings
- Elasto-plastic properties of polymeric varnishes
- Wear properties of rubber seals
- Friction and wear on Brake Pads
- Hardness of DLC-coated tappets
- Controlled lubricant studies
- Scratch resistance of chrome-plated trim
- Adhesion of polymeric bumper paint
- Mechanical properties of automotive tyre
Application Bulletin n°15

- Characterization of Polymers
- Quality Control of Minidisk polymer topcoat with Nano Scratch Tester and Tribometer
- Nano Scratch method developed as reference test for polymeric automobile topcoats
- Failure properties of nail varnish investigated with the Micro Scratch Teste

Application Bulletin n°14

- Measurement of hardness as a function of depth in nitrided 316L stainless steel
- Scratch Test Atlas of typical failure modes obtained in scratch testing with the Revetest instrument
- High-Temp. Tribometer for friction comparison of automobile brake pad materials
Application Bulletin n°13

- Influence of tip size on the critical load during scratch testing with the Micro Scratch Tester
- Failure of TiN-coated polymer measured with the Pin-on-Disk Tribometer
- Nano-Scratch Tester (NST) for measurement of dielectric thin films

Application Bulletin n°10

- New LOC module for the SFM provides high resolution frictional contrast
- Characterization of Tribological transfer films using combined NHT/SFM
Application Bulletin n°08

- New Industrial Calotest for improved coating thickness determination
- Micro Hardness Tester (MHT) for fracture toughness determination of brittle materials
- New Tribometer option for reciprocating wear testing of plasticised tickets
- Low-load Micro Scratch Tester (MST) for characterization of thin polymer films
Application Bulletin n°07

- Forthcoming Nano Scratch Tester (NST) for characterization of ultra-thin films
- Micro structured silicon wafers compared with the CSM Tribometer
- Combined NHT/SFM for investigating the tip defect of common indenters
Application Bulletin n°06

- Micro Scratch Tester (MST) for assessing the scratch resistance of SiO2 passivation layers
- High-Vacuum Tribometer for MoS2 alloy characterization
- Combined NHT/SFM for characterization of Silicon materials
Application Bulletin n°04

- Modified Pin-on-Disc Tribometer for controlled lubricant studies
- Diamond knife for MST characterization of coated optical fibers
- Controlling magnetic hard disk adhesion to ceramic substrates with the MST
- Scanning force microscopy of low load indentations into aluminum thin films