硬質膜

硬質薄膜の特性評価の要求をとらえて、CSMでは、約30年前に最初のスクラッチ試験機（レベテスト）を開発しました。

以来、以下のような幅広い分野での硬質膜の評価で、適用を広げています。

Related documents


Application Bulletin n°32	Characterization of thermal spray coatings by instrumented indentation and scratch testing Part II: Indentation of plasma sprayed coatings
Application Bulletin n°30	Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates Measurement of Acoustic Emission during Microindentation
Application Bulletin n°27	Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure
Application Bulletin n°03	- New integrated SFM objective for better characterization of NHT indentations - Modified Micro Scratch Tester (MST) for improved force resolution at low loads - Hard coating characterisation with the CSM Tribometer
Application Bulletin n°02	- Vickers indentation using CSM's Micro Scratch Tester (MST) - Abrasion testing of hard coatings with the Calowear Tester - Quality control of IC bonding pads with the Nano Hardness Tester (NHT) - Hard coating characterization with the Revetest (RVT) scratch tester
Application Bulletin n°01	- New Nano-Hardness Tester (NHT) for characterization of MoS2 thin films - Automobile bumper paint adhesion analyzed using Micro Scratch Tester (MST) - Using CSM's Revetest (RVT) scratch-tester for Rockwell indentation - Hard coating characterization with the Revetest (RVT) scratch tester