Nano Scratch Testeur (10uN - 1N)

Scratch nanoScratch nano

Le nanoscratch testeur est spécifiquement dédié à la caractérisation des propriétés d'adhésion des films et des revêtements minces présentant des épaisseurs inférieures à 800 nm. Le nanoscratch testeur peut être employé pour l'analyse de couches organiques ou inorganiques, qu'elles soient dures ou molles. Les échantillons sont issus des traitements PVD, CVD, PACVD, pour des applications touchant le domaine des peintures, laques, vernis, couches ophtalmiques, microélectroniques, cosmétiques. Les substrats peuvent être des alliages métalliques, semiconducteurs, verres, revêtements réfractaires ou matériaux organiques.

Spécifications

Options

csm title Liens associés

csm title Related documents
Scratch Catalog
Products catalogs
Application Bulletin n°37

Physical characterization of coated surfaces - Part I : Instrumented Indentation
Application Bulletin n°34

Characterization of the scratch resistance of ceramic tiles
Application Bulletin n°32

Characterization of thermal spray coatings by  instrumented indentation and scratch testing Part II:  Indentation of plasma sprayed coatings
Application Bulletin n°30

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Measurement of Acoustic Emission during Microindentation
Application Bulletin n°28

Characterization of thermal spray coatings by instrumented indentation and scratch testing: Part l
Application Bulletin n°27

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure
Application Bulletin n°15

- Characterization of Polymers
- Quality Control of Minidisk polymer topcoat with Nano Scratch Tester and Tribometer
- Nano Scratch method developed as reference test for polymeric automobile topcoats
- Failure properties of nail varnish investigated with the Micro Scratch Teste

Application Bulletin n°13

- Influence of tip size on the critical load during scratch testing with the Micro Scratch Tester
- Failure of TiN-coated polymer measured with the Pin-on-Disk Tribometer
- Nano-Scratch Tester (NST) for measurement of dielectric thin films

Application Bulletin n°12

- Micro-Electronic Applications
- Nano-Scratch Tester (NST) for characterizing anti-stiction coatings for Microsystems
- In-situ Integrated Circuit (IC) characterization with the Nano Hardness Tester (NHT)
- Quality control of Micro-Slit reflective coating with the Nano-Scratch Tester (NST)
Application Bulletin n°11

- Nanoindentation with spherical indenters for characterization of stress-strain properties
- Characterization of IC bonded gold wires with the Nano Hardness Tester (NHT)
- New Nano-Scratch Tester (NST) allows better magnetic hard disk characterization
Application Bulletin n°07

- Forthcoming Nano Scratch Tester (NST) for characterization of ultra-thin films
- Micro structured silicon wafers compared with the CSM Tribometer
- Combined NHT/SFM for investigating the tip defect of common indenters
Application Bulletin n°04

- Modified Pin-on-Disc Tribometer for controlled lubricant studies
- Diamond knife for MST characterization of coated optical fibers
- Controlling magnetic hard disk adhesion to ceramic substrates with the MST
- Scanning force microscopy of low load indentations into aluminum thin films