Micro Scratch Testeur (30mN - 30N)

Micro ScratchMicro Scratch

Le Microscratch Testeur est largement utilisé pour caractériser la décohésion des couches minces et des revêtements ayant une épaisseur inférieure à 5 um. Le Micro Scratch Testeur est employé pour l'analyse des couches organiques ou inorganiques, qu'elles soient dures ou molles. Les échantillons sont issus des traitements PVD, CVD, PACVD, pour des applications touchant le domaine des peintures, laques, vernis, couches ophtalmiques, microélectroniques, cosmétiques. Les substrats peuvent être durs ou mous, qu'il s'agisse d'alliages métalliques, semiconducteurs, verres, revêtements réfractaires et matériaux organiques.

Spécifications

  • Méthode de scratch par pointe diamant
  • Inspection des scratchs par analyse optique automatisée
  • Boucle électronique d'asservissement de la force
  • Mesure de profondeur de rayure
  • Profil de surface

Options

  • Module scratch oscillant
  • Vidéo Haute résolution
  • Conscan, AFM
  • Large variété de pointes disponible
  • Mesure de dureté instrumentée
  • Module chauffant + 450 °C

csm title Liens associés

csm title Related documents
Scratch Catalog
Products catalogs
Application Bulletin n°34

Characterization of the scratch resistance of ceramic tiles
Application Bulletin n°33

Applications of the ConScan Surface Profilometer
Application Bulletin n°32

Characterization of thermal spray coatings by  instrumented indentation and scratch testing Part II:  Indentation of plasma sprayed coatings
Application Bulletin n°28

Characterization of thermal spray coatings by instrumented indentation and scratch testing: Part l
Application Bulletin n°15

- Characterization of Polymers
- Quality Control of Minidisk polymer topcoat with Nano Scratch Tester and Tribometer
- Nano Scratch method developed as reference test for polymeric automobile topcoats
- Failure properties of nail varnish investigated with the Micro Scratch Teste

Application Bulletin n°13

- Influence of tip size on the critical load during scratch testing with the Micro Scratch Tester
- Failure of TiN-coated polymer measured with the Pin-on-Disk Tribometer
- Nano-Scratch Tester (NST) for measurement of dielectric thin films

Application Bulletin n°09

- MST Swinging Module for variable frequency scratch testing
- Combined NHT/SFM for investigation the mechanical properties of Cr2O3 thin films
- New Industrial Calotest allows greater fl exibility for measuring over/undersized samples
Application Bulletin n°08

- New Industrial Calotest for improved coating thickness determination
- Micro Hardness Tester (MHT) for fracture toughness determination of brittle materials
- New Tribometer option for reciprocating wear testing of plasticised tickets
- Low-load Micro Scratch Tester (MST) for characterization of thin polymer films
Application Bulletin n°06

- Micro Scratch Tester (MST) for assessing the scratch resistance of SiO2 passivation layers
- High-Vacuum Tribometer for MoS2 alloy characterization
- Combined NHT/SFM for characterization of Silicon materials
Application Bulletin n°02

- Vickers indentation using CSM's Micro Scratch Tester (MST)
- Abrasion testing of hard coatings with the Calowear Tester
- Quality control of IC bonding pads with the Nano Hardness Tester (NHT)
- Hard coating characterization with the Revetest (RVT) scratch tester
Application Bulletin n°01

- New Nano-Hardness Tester (NHT) for characterization of MoS2 thin films
- Automobile bumper paint adhesion analyzed using Micro Scratch Tester (MST)
- Using CSM's Revetest (RVT) scratch-tester for Rockwell indentation
- Hard coating characterization with the Revetest (RVT) scratch tester