Hartstoffbeschichtungen

Hard CoatingHard Coating

Als das Vorkommen von Beschichtungsgeräten in der Industrie zunahm, entwickelte CSM ihr erstes Messgerät zur Charakterisierung von dünnen Hartstoffbeschichtungen.

Seither kontrollieren und analysieren unsere Geräte Hartstoffbeschichtungen:

  • für Schneid und Umformwerkzeuge                                                             Bohrer, Einsätze,...
  • für die Automobilindustrie
    Einspritzsysteme, Kolbenringe,...
  • für den Maschinenbau
    Webstühle, Strickmaschinen,...
  • für dekorative Anwendungen
    Uhren, Beschläge, Accessoires, etc.

csm title Related documents
Application Bulletin n°32

Characterization of thermal spray coatings by  instrumented indentation and scratch testing Part II:  Indentation of plasma sprayed coatings
Application Bulletin n°30

Nanoindentation and Nanoscratch of Oxide Coatings on Thin Film Polymer Substrates

Measurement of Acoustic Emission during Microindentation
Application Bulletin n°27

Mechanical properties of ultrananocrystalline diamond (UNCD) films with an influence of the nucleation density on the structure
Application Bulletin n°03

- New integrated SFM objective for better characterization of NHT indentations
- Modified Micro Scratch Tester (MST) for im­proved force resolution at low loads
- Hard coating characterisation with the CSM Tribometer
Application Bulletin n°02

- Vickers indentation using CSM's Micro Scratch Tester (MST)
- Abrasion testing of hard coatings with the Calowear Tester
- Quality control of IC bonding pads with the Nano Hardness Tester (NHT)
- Hard coating characterization with the Revetest (RVT) scratch tester
Application Bulletin n°01

- New Nano-Hardness Tester (NHT) for characterization of MoS2 thin films
- Automobile bumper paint adhesion analyzed using Micro Scratch Tester (MST)
- Using CSM's Revetest (RVT) scratch-tester for Rockwell indentation
- Hard coating characterization with the Revetest (RVT) scratch tester